单臂路由实现VLAN间的访问控制
版权声明:原创作品,允许转载,转载时请务必以超链接形式标明文章 原始出处 、作者信息和本声明。否则将追究法律责任。http://49344.blog.51cto.com/39344/40449 |
拓扑图我就不画了,没那么多闲工夫,相信大家可以很容易明白大体的结构
因客户没有三层交换,特提出此种方案。
划分2个VLAN VLAN 1 和 VLAN 2 要求VLAN2可以访问VLAN1,而VLAN1不能访问VLAN2。 功能我已经具体实现过了 配置我大体写了一下,不是很复杂,相信大家可以看明白, 下面列出了路由器的版本和具体的配置。 CISCO#show version Cisco IOS Software, 2801 Software (C2801-ADVENTERPRISEK9-M), Version 12.4(9)T, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2006 by Cisco Systems, Inc. Compiled Fri 16-Jun-06 23:33 by prod_rel_team ROM: System Bootstrap, Version 12.3(8r)T9, RELEASE SOFTWARE (fc1) System returned to ROM by bus error at PC 0x6283B684, address 0x0 at 05:46:17 BJ Fri Aug 17 2007 System restarted at 05:47:43 BJ Fri Aug 17 2007 System image file is "flash:c2801-adventerprisek9-mz.124-9.T.bin" This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com. Cisco 2801 (revision 6.0) with 235520K/26624K bytes of memory. Processor board ID FHK1035F047 2 FastEthernet interfaces 1 Virtual Private Network (VPN) Module 6 Voice FXO interfaces 1 DSP, 8 Voice resources DRAM configuration is 64 bits wide with parity disabled. 191K bytes of NVRAM. 250880K bytes of ATA CompactFlash (Read/Write) Configuration register is 0x2102 interface FastEthernet0/1 ip address 218.****** 255.255.255.252 ip nat outside ip virtual-reassembly duplex auto speed auto interface FastEthernet0/0 no ip address ip nat inside ip virtual-reassembly duplex auto speed auto ! interface FastEthernet0/0.1 encapsulation dot1Q 1 native ip address 192.168.1.1 255.255.255.0 ip nat inside ip virtual-reassembly ! interface FastEthernet0/0.2 encapsulation dot1Q 2 ip address 192.168.20.1 255.255.255.0 ip access-group infilter in ip access-group outfilter out ip nat inside ip virtual-reassembly 重要部分************************************************************** ip access-list extended infilter permit ip 192.168.20.0 0.0.0.255 192.168.1.0 0.0.0.255 reflect feng permit ip any any ip access-list extended outfilter evaluate feng deny ip 192.168.1.0 0.0.0.255 192.168.20.0 0.0.0.255 permit ip any any ********************************************************************* ip access-list 100 permit ip any any ip nat pool www *********** netmask 255.255.255.252 ip nat inside source list 100 pool www overload 本文出自 “yazai” 博客,请务必保留此出处http://49344.blog.51cto.com/39344/40449 本文出自 51CTO.COM技术博客 |


风不停
博客统计信息
热门文章
最新评论
友情链接
